In 2012, we built a new workshop.
Now that I have the space to work... I've picked up some bikes to fix. Right now, I have a 1989-or-so Kuwahara mountain bike, a Miele 700c hybrid commuter, and a lugged Carlton frame that needs a lot of work.
Yes! whenever bicycles are broken, or menaced by international communism, Bicycle Repair Man is ready!
Tuesday, January 1, 2013
Tuesday, April 5, 2011
El Cóndor Pasa
When I heaved my bike out of the rack last Monday morning I noticed it seemed a lot more wobbly than normal.
I broke a seat rail! Looks like metal fatigue. It is a shame; I really liked the "Condor" (which is, sadly, rare now).
I replaced it with a garish black-and-yellow saddle that I would regret putting on a resale bike.
I broke a seat rail! Looks like metal fatigue. It is a shame; I really liked the "Condor" (which is, sadly, rare now).
I replaced it with a garish black-and-yellow saddle that I would regret putting on a resale bike.
Saturday, March 12, 2011
Bici II Hub Failure
After taking a few weeks off riding to work, I pushed a little too hard and broke my hub. Luckily I still had the old wheel and hadn't yet switched to the STI shifters, so it was a quick fix to put the old one back on.
Today I pulled apart the 7 speed wheel and I assessed the damage. It was incredibly hard to get the axle out - when the hub broke, it must have forced the bearings to really tighten. So much so that it smashed the bearing race:
It's hard to see from the photo but there are also imprints from the ball bearings themselves. Yikes.
This hub is toast - I've replaced it with an old Deore one and will avoid using nutted axles on this bike in the future.
Today I pulled apart the 7 speed wheel and I assessed the damage. It was incredibly hard to get the axle out - when the hub broke, it must have forced the bearings to really tighten. So much so that it smashed the bearing race:
It's hard to see from the photo but there are also imprints from the ball bearings themselves. Yikes.
This hub is toast - I've replaced it with an old Deore one and will avoid using nutted axles on this bike in the future.
Wednesday, January 12, 2011
Back to the 90s
The Tech Wild Thing is done! It's got better chainrings now, and I've gone over the drivetrain and tuned it up. It's a fast, light bike and will make a perfect commuter.
I decided to buy new chainrings for the Kona bike as the steel cranks I was using are bent and don't give much clearance between crank arm and frame. Also, the replacement rings cost about $30 after shipping, much better than the $80-90 it was going to cost for locally sourced (albeit high quality) parts.
I decided to buy new chainrings for the Kona bike as the steel cranks I was using are bent and don't give much clearance between crank arm and frame. Also, the replacement rings cost about $30 after shipping, much better than the $80-90 it was going to cost for locally sourced (albeit high quality) parts.
Monday, January 3, 2011
Nunu Bibike
It was basically a frame and wheels; everything else was broken or worn out. I finally hung a new old (repainted, heavy) steel crankset on it and it's now ready-ish.
I would have like to have got new chainwheels but that would add $100 to a $200 bike. I might still try to get a set of Alivio or entry-level Truvativ cranks, but if these ones work then we're good.
I also spent some quality time with Bici II, building up a new 7-speed solid axle rear wheel and swapping out the tiny SPDs for combo platform-SPD pedals. Now I can ride with boots, which will be nice for the cold weather.
Thursday, December 30, 2010
Foul, and most Foreign
I got to use the rim un-denter a bunch of times on this bike; those old steel wheels could likely tell some tales (like "The Day I Fell Off a Truck" and "Why Did You Ride Over The Train Tracks So Fast")
This picture shows that in France, the bike would have been a PL 22, and I lack the necessary wardrobe to actually ride the thing.
Sunday, December 12, 2010
Peugeot UE-08
Here is the Peugeot, well along the path to success.
Forgive the funny color, something's wrong with either the camera or iPhoto.
So far I have overhauled the rear axle (it was snapped!), replaced spokes on the rear wheel, tried to true it a little bit, and replaced one of the chainwheels on the Simplex rear derailleur.
I am going to "convert" it to drop bars (as the original brake levers, while quaint, are awful) - I have a spare set of Nitto bars and some nice Shimano levers from my Bianchi, so this will become a decent touring/commuting/city bike. It will be a 5-speed, with the front derailleur used just as a chain guide.
Subscribe to:
Posts (Atom)